Dell 9.7(0.0) manual Debug gvrp config events pdu, Parameters Config, Pdu

VersionDescription

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on C-Series, E-Series, and S-Series

Related	show gvrp statistics — displays the GVRP statistics.
Commands

debug gvrp

Enable debugging on GVRP.

S6000

Syntax	debug gvrp {config events pdu}
	To disable debugging, use the no debug gvrp {config events pdu}
	command.
Parameters	config	Enter the keyword config to enable debugging on the
		GVRP configuration.
	event	Enter the keyword event to enable debugging on the JOIN/
		LEAVE events.
	pdu	Enter the keyword pdu then one of the following Interface
		keywords and slot/port or number information:

• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information.

• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information.

• For a port channel interface, enter the keywords port- channel then a number. The range is from 1 to 128.

Defaults

Command Modes

Command History

Disabled.

EXEC

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000–ON.

GARP VLAN Registration (GVRP) 625