Dell 9.7(0.0) - page 741

Syntax ip http source-interface interface

To delete an interface, use theno ip http source-interface interface command.

Parameters interface Enter the following keywords and slot/port or number

information:

• For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

• For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

• For a Loopback interface, enter the keyword loopback

then a number from 0 to 16383.

• For a port channel interface, enter the keywords port-

channel then a number.

• For a VLAN interface, enter the keyword vlan then a

number from 1 to 4094.

Defaults The IP address on the system that is closest to the Telnet address is used in the

outgoing packets.

Command

Modes

CONFIGURATION

Command

History Version Description

9.7(0.0) Introduced on the S6000-ON.

9.3(0.1) Introduced on the S4810, S4820T, S6000, and Z9000.

8.3.11.1 Introduced on the Z9000

8.2.1.0 Increased number of VLANs on ExaScale to 4094 (was

2094)

8.1.1.0 Introduced on E-Series ExaScale

7.6.1.0 Support added for S-Series

7.5.1.0 Introduced on C-Series

Commands

ip ftp source interface

Configuring source interface for ftp communications.

Interfaces 741