Dell 9.7(0.0) manual To return to the default value, use the no hello-timecommand

Related Commands

VersionDescription

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.7.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

6.2.1.1Introduced on the E-Series.

max-age — changes the wait time before STP refreshes protocol configuration information.

hello-time — changes the time interval between BPDUs.

hello-time

Set the time interval between generation of the spanning tree bridge protocol data units (BPDUs).

Syntax

Parameters

Defaults

Command Modes

Command History

hello-time seconds

To return to the default value, use the no hello-timecommand.

seconds	Enter a number as the time interval between transmission of
	BPDUs. The range is from 1 to 10. The default is 2 seconds.
2 seconds
SPANNING TREE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

1556 Spanning Tree Protocol (STP)