Dell 9.7(0.0) manual Show isis protocol, Field Description Type, Circuit Id

	Field	Description
	Type	This value displays the adjacency type (Layer 2, Layer 2 or
		both).
	Priority	IS-IS priority the neighbor advertises. The neighbor with
		highest priority becomes the designated router for the
		interface.
	Uptime	Displays the interfaces uptime.
	Circuit Id	The neighbor’s interpretation of the designated router for
		the interface.
Example	The bold sections below identify that Multi-Topology IS-IS is enabled. This
	command displays only one IP address per line.

Dell#show isis neighbors

System Id Interface State Type Priority Uptime Circuit Id TEST Te 7/1 Up L1L2(M) 127 09:28:01 TEST.02

!

Dell#show isis neighbors detail

System Id Interface State Type Priority Uptime Circuit Id TEST Te 7/1 Up L1L2(M) 127 09:28:04 TEST.02 Area Address(es): 49.0000.0001

IP Address(es): 25.1.1.3*

MAC Address: 0000.0000.0000

Hold Time: 28

Link Local Address: fe80::201:e8ff:fe00:492c

Topology: IPv4 IPv6 , Common (IPv4 IPv6 )

Adjacency being used for MTs: IPv4 IPv6

Dell#

show isis protocol

Display IS-IS routing information.

S6000

Syntax

Parameters

Command Modes

Command History

show isis [vrf vrf-name] protocol

vrf vrf-name	(OPTIONAL) Enter the keyword vrf followed by the name of
	the VRF to display IS-IS routing information corresponding to
	that VRF.

•EXEC

•EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

904 Intermediate System to Intermediate System (IS-IS)