Dell 9.7(0.0) manual Qos-policy-output qos-policy-name

Usage Information

Related Commands

VersionDescription

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

Use this command to specify the name of the input QoS policy. Once input policy is specified, rate-police can be defined. This command enables the qos-policy- input configuration mode— (conf-qos-policy-in).

When changing a Service-Queue configuration in a QoS policy map, all QoS rules are deleted and re-added automatically to ensure that the order of the rules is maintained. As a result, the Matched Packets value shown in the show qos statistics command is reset.

rate police — incoming traffic policing function.

qos-policy-output

Create a QoS output policy.

S6000

Syntax

Parameters

Defaults

Command Modes

Command History

qos-policy-output qos-policy-name

To remove an existing output QoS policy, use the no qos-policy-outputqos- policy-namecommand.

qos-policy-	Enter your output QoS policy name in character format (32
name	characters maximum).
none
CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

1268 Quality of Service (QoS)