Layer 2 Overhead

Link MTU and IP MTU Delta

Untagged Packet

22 bytes

with VLAN-Stack

 

Header

 

Tagged Packet

26 bytes

with VLAN-Stack

 

Header

 

negotiation auto

Enable auto-negotiation on an interface.

S6000

Syntax

Defaults

Command Modes

Command History

Usage Information

negotiation auto

To disable auto-negotiation, use the no negotiation auto command.

Enabled.

INTERFACE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.0Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.1.1.0Introduced on the E-Series ExaScale.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

pre-6.2.1.0

Introduced on the E-Series.

This command is supported on C-Series, S-Series, and E-Series (TeraScale and ExaScale) 10/100/1000 Base-T Ethernet interfaces.

The no negotiation auto command is only available if you first manually set the speed of a port to 10Mbits or 100Mbits.

Interfaces

693

Page 693
Image 693
Dell 9.7(0.0) manual Negotiation auto, Pre-6.2.1.0