Dell 9.7(0.0) manual Clear line, Line-number, Aux, Console, Vty number

The total amount of space allowed is 16 FP Blocks. System flow requires three blocks and these blocks cannot be reallocated. The ipv4acl profile range is from 1 to 4.

When configuring space for IPv6 ACLs, the total number of Blocks must equal 13.

Ranges for the CAM profiles are from 1 to 10, except for the ipv6acl profile which is from 0 to 10. The ipv6acl allocation must be a factor of 2 (2, 4, 6, 8, 10).

If you enabled BMP, to perform a reload on the chassis to upgrade any configuration changes that have changed the NVRAM content, use the reload conditional nvram-cfg-changecommand.

clear line

Reset a terminal line.

Syntax	clear line {line-number aux 0 console 0 vty number}
Parameters	line-number	Enter a number for one of the 12 terminal lines on the
		system. The range is from 0 to 11.
	aux 0	Enter the keywords aux 0 to reset the auxiliary port.
	console 0	Enter the keywords console 0 to reset the console port.
	vty number	Enter the keyword vty then a number to clear a terminal
		line. The range is from 0 to 9.
Command	EXEC Privilege
Modes
Command	This guide is platform-specific. For command information about other platforms,
History	refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.1.1.0Introduced on the E-Series ExaScale.

7.6.1.0Introduced on the S-Series.

Control and Monitoring 95