Parameters

Defaults

Command Modes

Command History

Usage Information

To disable ip igmp immediate leave, use the no ip igmp immediate- leave command.

group-list

Enter the keywords group-listthen a string up to 16

prefix-list-

characters long of the prefix-list-name.

name

 

Not configured.

 

INTERFACE

 

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.8.1.0Introduced on the S-Series.

7.7.1.0Introduced on the C-Series.

E-Series legacy command

Querier normally sends some group-specific queries when a leave message is received for a group prior to deleting a group from the membership database. There may be situations when you require immediate deletion of a group from the membership database. This command provides a way to achieve the immediate deletion. In addition, this command provides a way to enable immediate-leave processing for specified groups.

ip igmp last-member-query-interval

Change the last member query interval, which is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages. This interval is also the interval between Group- Specific Query messages.

S6000

Syntaxip igmp last-member-query-interval milliseconds

To return to the default value, use the no ip igmp last-member-query- interval command.

642

Internet Group Management Protocol (IGMP)

Page 642
Image 642
Dell 9.7(0.0) manual Ip igmp last-member-query-interval, Group-list, Syntaxip igmp last-member-query-interval milliseconds