Dell 9.7(0.0) Version Description 7.0, Field Description Undefined, Dist/Metric, Last Change

	Version	Description
	8.3.7.0	Introduced on the S4810.
	8.1.1.0	Introduced on the E-Series ExaScale.
	7.9.1.0	Introduced VRF on the E-Series.
	7.6.1.0	Introduced on the S-Series.
	7.5.1.0	Introduced on the C-Series.
	pre-6.1.1.0	Introduced on the E-Series.
Usage	The following describes the show ip route all command in the following
Information	example.
	Field	Description
	(undefined)	Identifies the type of route:
		•	C = connected
		•	S = static
		•	R = RIP
		•	B = BGP
		• IN = internal BGP
		• EX = external BGP
		• LO = Locally Originated
		•	O = OSPF
		• IA = OSPF inter area
		• N1 = OSPF NSSA external type 1
		• N2 = OSPF NSSA external type 2
		• E1 = OSPF external type 1
		• E2 = OSPF external type 2
		•	i = IS-IS
		• L1 = IS-IS level-1
		• L2 = IS-IS level-2
		• IA = IS-IS inter-area
		• * = candidate default
		• > = non-active route
		• + = summary routes
	Destination	Identifies the route’s destination IP address
	Gateway	Identifies whether the route is directly connected and on
		which interface the route is configured.
	Dist/Metric	Identifies if the route has a specified distance or metric.
	Last Change	Identifies when the route was last changed or configured.

806 IPv4 Routing