Dell 9.7(0.0) manual Show redundancy

Usage Information

Example

Related Commands

VersionDescription

9.7(0.0) Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.7.0Introduced on the S4810.

8.3.11.1Introduced on the Z9000.

8.3.1.0Added the hard reset option.

Resetting the management unit is not allowed, and an error message displays if you try to do so. Resetting is a soft reboot, including flushing the forwarding tables.

Starting with Dell Networking OS version 7.8.1.0, you can run this command directly on the stack standby unit (standby master) to reset the standby. You cannot reset any other unit from the standby unit.

Stack MAC : 00:01:e8:8b:1a:36

Reload-Type : normal-reload [Next boot : normal-reload] -- Stack Info --

Unit UnitType Status ReqTyp CurTyp Version Ports

----------------------------------------------------

0	Management	online S6000	S6000	9.7.0.0	128
1	Standby	online S6000	S6000	9.7.0.0	128
2	Member	online S6000	S6000	9.7.0.0	128
3	Member	online S6000	S6000	9.7.0.0	128
4	Member	online S6000	S6000	9.7.0.0	128
5	Member	online S6000	S6000	9.7.0.0	128

6Member not present

7 Member not present

8 Member not present

9 Member not present

10 Member not present

11 Member not present

•reload – reboots Dell Networking OS.

show redundancy

Display the current redundancy configuration (status of automatic reboot configuration on stack management unit).

Syntax

Command Modes

Command History

show redundancy

•EXEC

•EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

Stacking 1533