Dell 9.7(0.0) manual Show inventory media slot, Media slot

show inventory

Display the S-Series or Z-Series switch type, components (including media), and Dell Networking Operating System (OS), including hardware identification numbers and configured protocols.

Syntax

Parameters

show inventory [media slot]

media slot	(OPTIONAL) Enter the keyword media then the stack ID of
	the stack member for which you want to display pluggable
	media inventory.
	NOTE: This parameter is available but not supported in
	Dell Networking Operating System version 8.3.11.4.
	Because stacking is not supported, if you use this
	parameter, the output displays “Media not present or
	accessible” (refer to the Usage Information section).

Defaults

Command Modes

Command History

Usage Information

Example (S6000)

none

CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

9.0.0.0Introduced on the Z9000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

8.3.11.4Output expanded to include Piece Part ID (PPID) and eSR4 optics.

8.3.11.1Introduced on the Z9000.

7.6.1.0Introduced this version of the command for S-Series. S- Series output differs from E-Series.

If there are no fiber ports in the unit, just the header under show inventory media displays. If there are fiber ports but no optics inserted, the output displays Media not present or accessible.

Dell#show inventory		: S6000
System Type
System Mode		: 1.0
Software Version		: 9-4(0-168)
Unit Type		Serial Number		Part Number
Rev	Piece Part ID		Rev	Svc Tag Exprs Svc Code

Control and Monitoring 131