Dell 9.7(0.0) manual Command History Example, Added the discard-counters , interface keywords

Defaults

Command Modes

source- address- validation

discard- counters

interface interface

none

•EXEC

•EXEC Privilege

Display the interfaces configured with IP Source Guard.

(OPTIONAL) Display the number of dropped packets.

(OPTIONAL) Specifies an interface to show the discard counters.

Enter any of the following keywords and slot/port or number information:

•For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information.

•For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information.

•For a port channel interface, enter the keywords port- channel then a number. The range is from 1 to 128.

Command History

Example

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.6(0.0)	Added the discard-counters,interface keywords, and
	the interface variable.
Version 9.0.2.0	Introduced on the S6000.
Version	Introduced on the S4820T.
8.3.19.0
Version 8.3.11.1	Introduced on the Z9000.
Version 8.3.7.0	Introduced on the S4810.
Version 8.3.1.0	Introduced on the E-Series.
Version 7.8.1.0	Introduced on the C-Series and S-Series.

The following example displays the interfaces configured with IP Source Guard:

Dell> show ip dhcp snooping source-address-validation ip sav access-list on TenGigabitEthernet 1/1

Total cam count 3

permit host 0.0.0.0 count (0 packets) permit host 10.1.1.252 count (0 packets) permit host 10.1.1.253 count (0 packets)

Dynamic Host Configuration Protocol (DHCP) 575