Dell 9.7(0.0) manual Arp backoff-time seconds, Range is from 1 to 3600. The default is

Usage Information

Related Commands

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.4(0.0)	Added support for VRF.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.5.1.0Added support for 4-port 40G line cards on ExaScale.

8.3.7.0Introduced on the S4810.

8.1.1.0Introduced on the E-Series ExaScale.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

pre-6.2.1.0 Introduced on the E-Series.

You cannot use Class D or Class E IP addresses or zero IP address (0.0.0.0) when creating a static ARP. Zero MAC addresses (00:00:00:00:00:00) are also invalid.

You can use the vrf attribute of this command to create a static ARP entry on either a default or a non-default VRF. You cannot use this parameter to create any static ARPs corresponding to management VRFs. When a VRF is deleted using the no ip vrf command, all the static ARP configurations that belong to that VRF are removed automatically.

clear arp-cache — clears dynamic ARP entries from the ARP table.

show arp — displays the ARP table.

arp backoff-time

Set the exponential timer for resending unresolved ARPs.

S6000

Syntax	arp backoff-time seconds
Parameters	seconds	Enter the number of seconds an ARP entry is black-holed.
		The range is from 1 to 3600. The default is 30.
Defaults	30

IPv4 Routing 743