VersionDescription

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

Usage

To access this command, enter the class-mapcommand. After the class map is

Information

identified, you can configure the match criteria.

Related

class-map — identifies the class map.

Commands

 

match mac dot1p

Configure a match criterion for a class map based on a dot1p value.

S6000

Syntax

Parameters

Defaults

Command Modes

Command History

match mac dot1p {dot1p-list}

dot1p-list

Enter a dot1p value. The range is from 0 to 7.

none

CLASS-MAP

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

Usage

To access this command, enter the class-mapcommand. After the class map is

Information

identified, you can configure the match criteria.

Related

class-map — identifies the class map.

Commands

 

Quality of Service (QoS)

1263

Page 1263
Image 1263
Dell 9.7(0.0) manual Match mac dot1p dot1p-list, Dot1p-list Enter a dot1p value. The range is from 0 to