Command
Modes
ROUTER OSPF
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
Usage
Information
To configure all routers and access servers within a stub, use this command.
Related
Commands router ospf — enters ROUTER OSPF mode to configure an OSPF instance.
auto-cost
Specify how the OSPF interface cost is calculated based on the reference bandwidth method.
S6000
Syntax auto-cost [reference-bandwidth ref-bw]
To return to the default bandwidth or to assign cost based on the interface type,
use the no auto-cost [reference-bandwidth] command.
Parameters ref-bw (OPTIONAL) Specify a reference bandwidth in megabits per
second. The range is from 1 to 4294967. The default is 100
megabits per second.
Defaults 100 megabits per second.
Command
Modes
ROUTER OSPF
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
Open Shortest Path First (OSPFv2 and OSPFv3) 1063