Command
Modes • EXEC
• EXEC Privilege
Command
History Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.2(0.2) Added support for the tunnel interface type.
9.1(0.0) Updated Management Ethernet output to include two
global IPv6 addresses on S4810 and Z9000 and added
output example showing OpenFlow instance ID.
8.3.12.1 Updated command output to support multiple IPv6
addresses on S4810.
8.3.11.4 Output expanded to support eSR4 optics in Z9000.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.3.7.0 Introduced on the S4810.
8.2.1.2 Included SFP and SFP+ optics power detail in the E-Series
and C-Series output.
8.2.1.0 Added support for 4093 VLANs on the E-Series ExaScale.
Prior releases supported 2094.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Output expanded to include SFP+ media on the C-Series.
7.6.1.0 Introduced on the S Series.
7.5.1.0 Introduced on the C-Series.
6.4.1.0 Changed the organization of the display output.
6.3.1.0 Added the Pluggable Media Type field in the E-Series
TeraScale output.
Usage
Information Use the show interfaces command for details on a specific interface.
In the output of the show interfaces managementEthernet slot/port
command, the value displayed for the bytes field under the Input Statistics section
is 4 bytes less for each packet that is received (inbound) by the interface. For
example, if 1000 packets, with each packet being 64 bytes in size, arrive at the
interface, the bytes count is displayed as 6000. The lower value for the byte
statistical counter is because of 4 bytes being discarded for each packet from the
computation.
Interfaces 701