no-summary (OPTIONAL) Specify that no summary LSAs should be sent
into the NSSA.
Defaults Not configured.
Command
Modes
ROUTER OSPF
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
area range
Summarize routes matching an address/mask at an area border router (ABR).
S6000
Syntax area area-id range ip-address mask [not-advertise]
To disable route summarization, use the no area area-id range ip-address
mask command.
Parameters area-id Specify the OSPF area in dotted decimal format (A.B.C.D.) or
enter a number from zero (0) to 65535.
ip-address Specify an IP address in dotted decimal format.
mask Specify a mask for the destination prefix. Enter the full mask
(for example, 255.255.255.0).
not-advertise (OPTIONAL) Enter the keywords not-advertise to set the
status to DoNotAdvertise (that is, the Type 3 summary-LSA is
suppressed and the component networks remain hidden
from other areas.)
Open Shortest Path First (OSPFv2 and OSPFv3) 1061