Version

Description

9.7(0.0)

Introduced on the S Series and Z Series switches.

Example

Dell(conf)#sflow max-header-size extended

 

sflow polling-interval (Global)

Set the sFlow polling interval at a global level.

Syntax

sflow polling-interval interval value

Parameters

Defaults

Command Modes

Command History

Usage Information

To return to the default, use the no sflow polling-intervalinterval command.

interval value Enter the interval value in seconds. The range is from 15 to 86400 seconds. The default is 20 seconds.

20 seconds

CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.2.1.0Introduced on S-Series Stacking.

8.1.1.0Introduced on the E-Series ExaScale.

7.7.1.0Introduced on the S-Series.

7.6.1.0Introduced on the C-Series.

7.4.1.0Introduced on the E-Series.

The polling interval for an interface is the maximum number of seconds between successive samples of counters sent to the collector. This command changes the global default counter polling (20 seconds) interval. You can configure an interface to use a different polling interval.

sFlow

1469

Page 1469
Image 1469
Dell 9.7(0.0) manual Sflow polling-interval Global, Dellconf#sflow max-header-size extended