Dell 9.7(0.0) manual Policy-map-output policy-map-name

Command History

Usage Information

Related Commands

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

The input policy map is used to classify incoming traffic to different flows using class-map, QoS policy, or incoming packets DSCP. This command enables Policy- Map-Input Configuration mode (conf-policy-map-in).

service-queue — assigns a class map and QoS policy to different queues.

service-policy input — applies an input policy map to the selected interface.

policy-map-output

Create an output policy map.

S6000

Syntax

Parameters

Defaults

Command Modes

Command History

policy-map-output policy-map-name

To remove a policy map, use the no policy-map-outputpolicy-map-namecommand.

policy-map-	Enter the name for the policy map in character format (32
name	characters maximum).
none
CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

1266 Quality of Service (QoS)