Dell 9.7(0.0) - page 1037

• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
Defaults none
Command
Modes • EXEC
• EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Added support for VRF. Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.1 Introduced on the S4810.
Example Dell# show ipv6 neighbors
IPv6 Address Expires(min)
Hardware Address State Interface VLAN CPU
---------------------------------------------------------------
-----------------------------------------------
100::1 0.03
00:00:00:00:00:22 DELAY Te 1/12 - CP
fe80::200:ff:fe00:22 232
00:00:00:00:00:22 STALE Te 1/12 - CP
500::1 0.60
00:01:e8:17:5c:af REACH Te 1/13 - CP
fe80::200:ff:fe00:17 232
00:00:00:00:00:29 REACH Te 1/14 - CP
900::1 0.60
00:01:e8:17:5c:b1 STALE Po 23 - CP
400::1 0.60
00:01:e8:17:5c:ae REACH Te 1/2 Vl 100 CP
Dell#
Neighbor Discovery Protocol (NDP) 1037