To copy the
running
configuration
enter the keyword running-config
To copy the
startup
configuration
enter the keyword startup-config
To copy using
a Secure Copy
(SCP),
enter the keyword scp:
• If you enter scp: in the source
position, enter the target URL;
• If you enter scp: in the target
position, first enter the source URL;
To copy a file
on the external
FLASH
enter slot0:// followed by the
filename
To copy a file
on a TFTP
server
enter tftp://hostip/filepath
To copy a file
from an
external USB
drive
enter usbflash://filepath
Command
Modes
EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON. Added the
nfsmount:<mount-point> parameters that enables you
to mount a remote NFS file system.
9.4(0.0) Added the compressed-config parameter.
9.0.2.0 Introduced on the S6000.
8.4.1.0 Added IPv6 addressing support for FTP, TFTP, and SCP.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added usbflash and rpm0usbflash commands on E-
Series ExaScale.
62 File Management