Dell 9.7(0.0) manual Track ip route metric threshold, Prefix-len

Defaults

Command Modes

Command History

Usage Information

Related Commands

none

CONFIGURATION

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

8.3.12.0Introduced on the S4810.

8.4.1.0Introduced.

Use this command to create an object that tracks the line-protocol state of a Layer 2 interface by monitoring its operational status (UP or DOWN).

When the link-level status goes down, the tracked object status is considered to be DOWN; if the link-level status is up, the tracked object status is considered to be UP.

•show track – displays information about tracked objects, including configuration, current state, and clients which track the object.

•track interface ip routing – configures object tracking on the routing status of an IPv4 Layer 3 interface.

track ip route metric threshold

Configure object tracking on the threshold of an IPv4 route metric.

Syntax	track object-id ip route ip-address/prefix-len metric threshold
	[vrf vrf-name]
	To return to the default setting, use the no track object-idcommand.
Parameters	object-id	Enter the ID number of the tracked object. The range is 1 to
		500.
	ip-address/	Enter an IPv4 address in dotted decimal format. The valid
	prefix-len	IPv4 prefix lengths are from /0 to /32.
	vrf vrf-name	(Optional) E-Series only: You can configure a VPN routing
		and forwarding (VRF) instance to specify the virtual routing
		table to which the tracked route belongs.
Defaults	none
Command	CONFIGURATION
Modes
Command	Version	Description
History
	9.7(0.0)	Introduced on the S6000-ON.

1048 Object Tracking