| VPort 2310 User’s Manual | Getting Started | |
|
|
| |
| NOTE | After powering on the VPort 2310, wait a few seconds for the POST (Power On Self Test) to | |
|
| run. The IP address will be assigned when the CONNECT LED is lit. |
|
|
|
|
|
Using IP Reporter
1.Run IPReporter.exe to search for the VPort. After the IP Reporter window opens, you may also click on the Search button to initiate a search.
2.When the search has concluded, the MAC address and IP address of the VPort will be listed in the IP Reporter window.
NOTE | If the VPort has been assigned an IP address, the Assigned status will be listed as Yes. If the |
| VPort has not been assigned an IP address, the Assigned status will not be listed as Yes. In this |
| case, check to see if the VPort’s firmware version supports the DHCP installation function, or if |
| there is any problem with the network environment. |
|
|
