VPort 2310 User’s Manual | System Configuration |
that it fits the desired VMD area.
Step 3: Use Window Name to assign a name to this VMD window (refer to the Trigger Condition in the Configuration/Application page).
Step 4: Set up the Sensitivity and Percentage parameters by moving the percentage cursor.
Step 5: Click on the Save button to save the settings.
Step 6: To test the VMD condition, check the action of the graphics bar on the left side of the save button. Wave your hand in front of the camera, in the VMD area, and then note which color shows up in the graphics bar. Green means VMD is not triggered, and Red means VMD is triggered.
Step 7: Users will see a red frame with the VMD window size in the homepage’s image if the VMD is triggered.
NOTE | Motion detection is provided as a reference because it is |
| settings are configured to be very sensitive to motion, some triggered events might actually be |
| false alarms, since in fact there is only a tiny difference between sequential images. False alarms |
| can be triggered by the flashing of florescent lights, shifting of shadows, etc. |
|
|
