4
System Configuration
After installing the hardware, the next task required is to configure VPort 2310’s settings.You may use one of three configuration methods: via web access, via FTP, and via Telnet.
This chapter includes the following sections:
!System Configuration Via Web Access
"System
"Security
"Network
"DDNS & UPnP
"Video
"Motion Detection
"Application
"Camera Control
"Homepage Layout
"View log file
"View parameters
"Factory default
!System Configuration Via FTP
"CONFIG ini
!System Configuration Via Telnet
"Telnet Commands
"System core debugging
"Monitor changes to the digital input status
"Stop information dumping
"Query status of digital inputs
"Set digital outputs
"Erase snapshots stored in Flash memory
"Erase logo and graphic buttons
"Reset network to new settings
"Restore facotry default settings
"Reset system
