VPort 2310 User’s Manual | System Configuration |
Interface mode
The COM port supports 2 serial interfaces, although only one interface can be used at a time. Depending on the interface used by the attached device, administrators must set the Interface mode to either
NOTE | The |
| These 2 interfaces cannot be used at the same time. |
|
|
Baud rate (bps)
The administrator should set the baud rate to the baud rate specified by the PTZ camera’s serial communication specs.
Select Camera driver
Administrators must select the correct PTZ model under PTZ driver options, since each PTZ camera has its own protocols for the PTZ functions. Refer to Appendix B, Settings for Supported PTZ Cameras, to see the PTZ cameras that MOXA VPort 2310 Video Server supports. If the attached PTZ camera is not supported by the VPort, administrators can select Custom Camera to enter the proprietary commands for pan, tilt, zoom, and focus control.
Preset Position
Administrators can use the Preset Position function to set up the behavior of the PTZ camera in advance, and then users with the camera control privilege can directly move the camera’s lens to the preset position without the need to control the pan, tilt, and zoom buttons on VPort 2310’s homepage.
