Samsung Your Guide to Connecting HT-J5150 Devices to TVs and External Components

Connecting to a TV and External Devices

R

Red

W

White

Method 1 Method 2

Connections

External Devices

Connecting to a TV

AUDIO OUTOPTICAL OUTHDMI IN (ARC)

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV. If the TV supports ARC, you can hear the audio from your TV through the home cinema with only this cable connected. See page 14 in this manual and the section on ARC in your TV's user's manual for details.

Connecting to External Devices

Two methods of connecting external devices to your home cinema are explained below.

Method 1 AUX IN : Connecting an External Analogue Component

Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on the external analogue component.  Select the AUX mode.

~Be sure to match the colours on the cable plugs to the colours on the input and output jacks.

Method 2 OPTICAL : Connecting an External Digital Audio Component

Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite Receivers (Set-Top-Boxes) to the home cinema. Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the Digital Optical Out jack of the external digital device using a digital optical cable.  Select the D. IN mode.

✎To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.

✎This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.

✎This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.

Selecting an External Device to Use

To select an external device after you have connected it, press the FUNCTION button. Each time you press the button, the mode changes in this order : BD/DVD ￿ D. IN ￿ AUX ￿ FM

11 - English