Dell 9.7(0.0) manual Debug arp interface count value, Count value

debug arp

View information on ARP transactions.

S6000

Syntax

Parameters

Defaults

Command Modes

Command History

debug arp [interface] [count value]

To stop debugging ARP transactions, use the no debug arp command.

interface	(OPTIONAL) Enter the following keywords and slot/port or
	number information:
	• For a 10-Gigabit Ethernet interface, enter the keyword
	TenGigabitEthernet then the slot/port information.
	• For a 40-Gigabit Ethernet interface, enter the keyword
	fortyGigE then the slot/port information.
	• For the Management interface on the stack-unit, enter
	the keyword ManagementEthernet then the slot/port
	information. The slot range is from 0 to 1. The port range
	is 0.
	• For a port channel interface, enter the keywords port-
	channel then a number. The range is from 1 to 128.
	• For a VLAN interface, enter the keyword vlan then a
	number from 1 to 4094.
count value	(OPTIONAL) Enter the keyword count then the count value.
	The range is from 1 to 65534.
none
EXEC Privilege

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.5.1.0Added support for 4-port 40G line cards on ExaScale.

8.3.7.0Introduced on the S4810.

IPv4 Routing 753