Dell 9.7(0.0) manual Dns-server address address2...address8, Domain-name name

dns-server

Assign a DNS server to clients based on address pool.

S6000

Syntax

Parameters

dns-server address [address2...address8]

address	Enter a list of DNS servers that may service clients on the
	subnet. You may list up to eight servers, in order of
	preference.

Defaults	none
Command	DHCP <POOL>
Modes
Command	This guide is platform-specific. For command information about other platforms,
History	refer to the relevant Dell Networking OS Command Line Reference Guide.
	The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.2.1.0Introduced on the C-Series and S-Series.

domain-name

Assign a domain to clients based on the address pool.

S6000

Syntax

Parameters

Defaults

Command Modes

Command History

domain-name name

name Give a name to the group of addresses in a pool.

none

DHCP <POOL>

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

550 Dynamic Host Configuration Protocol (DHCP)