Dell 9.7(0.0) Dot1x reauth-max number, Dot1x server-timeout seconds, Parameters Seconds

dot1x reauth-max

Configure the maximum number of times a port can re-authenticate before the port becomes unauthorized.

Syntax

Parameters

Defaults

Command Modes

Command History

dot1x reauth-max number

To return to the default, use the no dot1x reauth-maxcommand.

number	Enter the permitted number of re-authentications. The range
	is from 1 to 10. The default is 2.
2
INTERFACE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

9.0.0.0Introduced on the Z9000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

8.3.11.1Introduced on the Z9000.

7.6.1.0Introduced on the C-Series and S-Series.

7.4.1.0Introduced on the E-Series.

dot1x server-timeout

Configure the amount of time after which exchanges with the server time-out.

Syntax	dot1x server-timeout seconds
	To return to the default, use the no dot1x server-timeoutcommand.
Parameters	seconds	Enter a time-out value in seconds. The range is from 1 to

300, where 300 is implementation dependant. The default is 30.

802.1X 173