Dell 9.7(0.0) Show ip ospf topology, Version Description 8.0 Introduced on the S4810 Example

Version	Description
8.3.8.0	Introduced on the S4810.

Example	Dell#show ip	ospf 10 timers rate-limit
	List of LSAs	in rate limit Queue
	LSA id: 1.1.1.0 Type: 3		Adv Rtid: 3.3.3.3 Expiry time:
	00:00:09.111		Adv Rtid: 3.3.3.3 Expiry time:
	LSA id: 3.3.3.3 Type: 1
	00:00:23.96
	Dell#

show ip ospf topology

Display routers in directly connected areas.

S6000

Syntax

Parameters

Defaults

Command Modes

Command History

show ip ospf [process-id vrf vrf-name] topology

process-id	Enter the OSPF Process ID to show a specific process. If no
	Process ID is entered, command applies only to the first
	OSPF process.
vrf vrf-name	Enter the keyword vrf followed by the name of the VRF to
	information on routers corresponding to a specific VRF that
	are in directly connected areas.
none

•EXEC

•EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.4.(0.0)	Added support for VRF.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.8.1.0Added support for Multi-Process OSPF.

Open Shortest Path First (OSPFv2 and OSPFv3) 1137