Dell 9.7(0.0) manual Debug ip bgp, Xxxxx

debug ip bgp

Display all information on BGP, including BGP events, keepalives, notifications, and updates.

S6000

Syntaxdebug ip bgp [ vrf vrf-name A.B.C.D X:X:X:X::X peer-group

peer-group-name] [in out]

To disable all BGP debugging, use the no debug ip bgp command.

Parameters	vrf vrf-name	Enter the keyword vrf and then the name of the VRF to
		debug BGP information corresponding to that VRF.
		NOTE: Use this attribute to debug BGP protocol
		operations corresponding to either a default or non-
		default VRF.
	A.B.C.D	Enter the IPv4 address of the neighbor in dotted decimal
		format.
	X:X:X:X::X	(OPTIONAL) Enter an IPv6 address.
	peer-group	Enter the keywords peer-groupthen the name of the peer
	peer-group-	group to debug.
	name
	in	(OPTIONAL) Enter the keyword in to view only information
		on inbound BGP routes.
	out	(OPTIONAL) Enter the keyword out to view only information
		on outbound BGP routes.
	A.B.C.D	Enter the IP address of peer in the A.B.C.D format.
	X:X:X:X::X	Enter the IPv6 IP address of peer in the X:X:X:X::X format.
	dampening	Enter the keyword dampening to view BGP dampening.
	events	Enter the keyword events to view BGP protocol events.
	ipv4	Enter the ipv4 IP address to view the IPV4 route information.
	ipv6	Enter the ipv6 IP address to view the IPV6 route information.
	keepalives	Enter the keyword keepalives to view BGP keepalives.
	notifications	Enter the keyword notifications to view BGP
		notifications.
	soft-	Enter the keywords soft-reconfigurationto view only
	reconfiguration	information on inbound BGP soft reconfiguration.
	updates	Enter the keyword updates to view BGP updates.
Command	EXEC Privilege
Modes

368 Border Gateway Protocol