Usage Information

Example

VersionDescription

7.5.1.0Introduced on the C-Series.

pre-6.1.1.0

Introduced on the E-Series.

The following describes the show hosts command in the following example.

Field

Description

Default domain...

Displays the domain name (if configured).

Name/address

States if DNS is enabled on the system.

lookup...

• If DNS is enabled, the Name/Address lookup is domain

 

 

service.

 

• If DNS is not enabled, the Name/Address lookup is static

 

mapping

Name servers

Lists the name servers, if configured.

are...

 

Host

Displays the host name assigned to the IP address.

Flags

Classifies the entry as one of the following:

 

• perm — the entry was manually configured and will not

 

time out

 

• temp — the entry was learned and will time out after 72

 

hours of inactivity.

 

Also included in the flag is an indication of the validity of the

 

route:

 

• ok — the entry is valid.

 

• ex — the entry expired.

 

• ?? — the entry is suspect.

TTL

Displays the amount of time until the entry ages out of the

 

cache. For dynamically learned entries only.

Type

Displays IP as the type of entry.

Address

Displays the IP addresses assigned to the host.

Dell#show hosts

is not set

 

 

Default domain

 

 

Name/address lookup uses static mappings

Name servers are not set

Type

Address

Host

Flags

TTL

-------- -----

----

----

-------

ks

(perm,

OK) -

IP

2.2.2.2

4200-1

(perm,

OK) -

IP

192.68.69.2

1230-3

(perm,

OK) -

IP

192.68.99.2

ZZr

(perm,

OK) -

IP

192.71.18.2

Z10-3

(perm,

OK) -

IP

192.71.23.1

Dell#

 

 

 

 

IPv4 Routing

791

Page 791
Image 791
Dell 9.7(0.0) manual Field Description Default domain, Name/address, Lookup, Name servers, Are Host