Dell 9.7(0.0) show config (for speed), show config (from INTERFACE RANGE mode)

no shutdown
Dell(conf-if-fo-1/4)#
show config (for speed)
Syntax show config
Command
Modes
INTERFACE MODE
Command
History Version Description
9.7(0.0) Introduced on the S6000-ON.
9.3(0.1) Introduced on the S6000.
Usage
Information In order for the speed information corresponding to an interface to appear in the
show command output, you must first configure the speed of that interface using
the speed command.
Example Dell(conf-if-te-1/1)#speed ?
100 100 Mbps
1000 1000 Mbps
10000 10000 Mbps
auto Auto negotiation (default)
Dell(conf-if-te-1/1)#speed 100
Dell(conf-if-te-1/1)#show config
interface TenGigabitEthernet 1/1
speed 100
no shutdown
show config (from INTERFACE RANGE mode)
Display the bulk configured interfaces (interface range).
S6000
Syntax show config
Command
Modes
CONFIGURATION INTERFACE (conf-if-range)
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
Interfaces 699