Dell 9.7(0.0) manual Sflow sample-rate Global, Sflow sample-rate value

sflow sample-rate (Global)

Change the global default sampling rate.

Syntax	sflow sample-rate value
	To return to the default sampling rate, use the no sflow sample-rate
	command.
Parameters	value	Enter the sampling rate value. For the C-Series and S-Series,
		the range is from 256 to 8388608 packets Enter values in
		powers of 2 only; for example, 4096, 8192, 16384, and so
		on. The default is 32768 packets.
Defaults	32768 packets
Command	CONFIGURATION
Modes
Command	This guide is platform-specific. For command information about other platforms,
History	refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.2.1.0Introduced on S-Series Stacking.

8.1.1.0Introduced on the E-Series ExaScale.

7.7.1.0Introduced on the S-Series.

7.6.1.0Introduced on the C-Series.

7.4.1.0Introduced on the E-Series.

Usage	Sample-rate is the average number of packets skipped before the sample is taken.
Information	This command changes the global default sampling rate. You can configure an
	interface to use a different sampling rate than the global sampling rate. If the value
	entered is not a correct power of 2, the command generates an error message
	with the previous and next power of 2 value. Select one of these two packet
	numbers and re-enter the command.
Related	sflow sample-rate (Interface) — changes the interface sampling rate.
Commands

sFlow 1471