Dell 9.7(0.0) manual Show ip pim tib, Source-address

Data path event summary:

0 no-cache messages received

0 last-hop switchover messages received 0/0 pim-assert messages sent/received 0/0 register messages sent/received

show ip pim tib

View the PIM tree information base (TIB).

S6000

Syntax

Parameters

Command Modes

Command History

show ip pim [vrf vrf-name] tib [group-address [source-address]]

vrf vrf-name	(OPTIONAL) Enter the keyword vrf followed by the name of
	the VRF to configure this setting on that VRF.
	NOTE: Applies to specific VRF if input is provided, else
	applies to Default VRF.
group-address	(OPTIONAL) Enter the group address in dotted decimal
	format (A.B.C.D).
source-address	(OPTIONAL) Enter the source address in dotted decimal
	format (A.B.C.D).

•EXEC

•EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Added support for VRF. Introduced on the S6000-ON.
9.5(0.0)	Introduced on the Z9500.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

8.3.11.1Introduced on the Z9000.

8.1.1.0Introduced on the E-Series ExaScale.

7.8.1.0Introduced on the S-Series.

PIM-Sparse Mode (PIM-SM) 1211