Dell 9.7(0.0) manual Neighbor route-map, Neighbor ip-address peer-group-nameroute-mapmap-name

If the AS-PATH contains both public and private AS number or contains AS numbers of an EBGP neighbor, the private AS numbers are not removed.

If a confederation contains private AS numbers in its AS-PATH, the software removes the private AS numbers only if they follow the confederation numbers in the AS path.

Private AS numbers are from 64512 to 65535 (2 byte).

neighbor route-map

Apply an established route map to either incoming or outbound routes of a BGP neighbor or peer group.

S6000

Syntax

Parameters

neighbor {ip-address peer-group-name}route-mapmap-name {in

out}

To remove the route map, use the no neighbor {ip-addresspeer- group-name}route-mapmap-name{in out} command.

ip-address	Enter the IP address of the neighbor in dotted decimal
	format.
peer-group-	Enter the name of the peer group.
name

Defaults

Command Modes

map-name

in

out

Not configured.

ROUTER BGP

Enter the name of an established route map.

If the Route map is not configured, the default is deny (to drop all routes).

Enter the keyword in to filter inbound routes.

Enter the keyword out to filter outbound routes.

NOTE: This command sends routes to peers only if an outbound policy is configured and if there is a change in the existing outbound policy.

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Border Gateway Protocol 399