Dell 9.7(0.0) manual Show system stack-ports

show system stack-ports

Display information about the stacking ports on all switches in the stack.

Syntax

Parameters

Defaults

Command Modes

Command History

show system stack-ports [status topology]

status	(OPTIONAL) Enter the keyword status to display the
	command output without the Connection field.
topology	(OPTIONAL) Enter the keyword topology to limit the table
	to just the Interface and Connection fields.
none

•EXEC

•EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.7.0Introduced on the S4810.

8.3.11.1Introduced on the Z9000.

Usage	The following describes the show system stack-portscommand shown in the
Information	following example.
	Field	Description
	Topology	Lists the topology of stack ports connected: Ring, Daisy
		chain, or Standalone.
	Interface	The unit/port ID of the connected stack port on this unit.
	Link Speed	Link Speed of the stack port (10 or 40) in Gb/s.
	Admin Status	The only currently listed status is Up.
	Connection	The stack port ID to which this unit’s stack port is
		connected.

Example	Dell#show system stack-ports
	Topology: Ring		Link Speed	Admin	Link
	Interface	Connection
			(Gb/s)	Status	Status
	---------------------------------------------------------
	1/4	5/4	42	up	up
	1/12	2/0	42	up	up
	2/1	0/120	42	up	up

Stacking 1535