Dell 9.7(0.0) manual Sflow enable Global, Sflow ingress-enable

sflow enable (Global)

Enable sFlow globally.

Syntax	sflow enable
	To disable sFlow, use the no sflow enable command.
Defaults	Disabled.
Command	CONFIGURATION
Modes
Command	This guide is platform-specific. For command information about other platforms,
History	refer to the relevant Dell Networking OS Command Line Reference Guide.
	The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.2.1.0Introduced S-Series Stacking.

8.1.1.0Introduced on the E-Series ExaScale.

7.7.1.0Introduced on the S-Series.

7.6.1.0Introduced on the C-Series.

6.2.1.1Introduced on the E-Series.

Usage	sFlow is disabled by default. In addition to this command, sFlow needs to be enable
Information	on individual interfaces where sFlow sampling is desired.
Related	sflow enable (Interface) — enables sFlow on interfaces.
Commands

sflow ingress-enable

Enable sFlow ingress on interfaces.

Syntax	sflow ingress-enable
	To disable sFlow, use the no sflow ingress enable command.
Defaults	Disabled.

1466 sFlow