Dell 9.7(0.0) manual Show logging auditlog, Dellconf#logging version

The following describes the two supported log messages formats:

•0 – Displays syslog messages format as described in RFC 3164, The BSD syslog Protocol

•1 – Displays SYSLOG message format as described in RFC 5424, The Syslog Protocol

Example	Dell(conf)#logging version	?
	<0-1> Select syslog version (default = 0)
	Dell(conf)#logging version	1

show logging auditlog

Displays an audit log.

Syntax

Defaults

Command Modes

Command History

Example

Related Commands

show logging auditlog

none

EXEC

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.5(0.0)	Introduced on the S4810, S4820T, S6000, Z9000, and MXL.

Dell(conf)#show logging audit

clear logging auditlog — clears audit log.

show logging

Display the logging settings and system messages logged to the internal buffer of the switch.

Syntaxshow logging [number history [reverse][number] reverse [number] summary]

Parameters	(OPTIONAL) Enter the number of messages displayed in the
number
	output. The range is from 1 to 65535.
history	(OPTIONAL) Enter the keyword history to view only
	information in the Syslog history table.

Simple Network Management Protocol (SNMP) and Syslog 1519