Canon L6000 manual LCD Messages, Message Error Code Cause Action

LCD Messages

The following messages are displayed in the LCD when the MultiPASS is performing a function or encounters an error. The Error Code appears on the Activity Report.

Message Error Code Cause Action

AUTO REDIAL	—	The MultiPASS is
		waiting to redial the
		other party’s number
		because the line was
		busy or the other
		party did not answer
		when you tried to send
		the document.
BUSY/NO SIGNAL	#005/018	The telephone number
		you dialed is busy.
		The fax number dialed
		was incorrect.
		The other party’s fax is
		not working.
		The other party is not
		using a G3 machine.
		The touch-tone/rotary
		pulse setting on your
		MultiPASS is incorrect.
		The receiving fax did
		not answer within 55
		seconds.

CALLING	—	The MultiPASS is
		calling the receiving
		fax machine.

Wait for the MultiPASS to try redialing. If that doesn’t work, wait until the MultiPASS starts to dial the number, then press STOP to cancel redialing. Try to send the document again at a later time.

Try sending the document at a later time.

Check the fax number and dial again.

Contact the other party and have them check their fax.

Contact the other party and have them send or receive the document using a G3 machine.

Set your MultiPASS to the setting that matches your telephone line (see page 8-4).

Contact the other party and have them check their fax. You can try to send the document manually. For an over- seas call, add pauses at the end of the registered number.

Press STOP if you want to cancel the transmission.

Troubleshooting

Chapter 10 Troubleshooting 10-11