Canon L6000 manual Introduction Chapter

❍Place the MultiPASS on a sturdy level surface. Do not place it on an unstable cart, stand, or table. If the unit falls, it could be seriously damaged.

❍Do not use the MultiPASS near water. If you spill liquid on or into the unit, unplug it immediately and call the Customer Care Center.

❍Slots and openings in the unit and on the back or bottom are provided for ventilation. To ensure reliable operation of the MultiPASS and to protect it from overheating, do not block or cover these openings. Do not block the openings by placing the unit on a bed, sofa, rug, or other similar surface. Do not place the unit near a radiator, nor in a closet or built-in cabinet unless proper ventilation is provided.

❍Operate the MultiPASS only from the type of power source indicated on the unit’s label. If you are unsure of the type of power available, consult your dealer or local power company.

❍Do not allow anything to rest on the power cord, and do not locate the MultiPASS where the cord will be walked on. Make sure the power cord is not knotted or kinked.

❍Do not push metal objects of any kind into the slots or openings on the cabinet. This could result in a risk of fire or electric shock.

❍Do not allow small objects (such as pins, paper clips, or staples) to fall into the MultiPASS. If something does fall into it that you cannot remove, unplug the unit immediately and call the Customer Care Center.

❍Unplug this product from the wall outlet and call the Customer Care Center if any of the following conditions exist:

•

•

•

•

•

The power cord or plug is damaged or frayed.

Liquid is spilled into the unit, or if the unit is exposed to rain or water.

Smoke, unusual noises, or odors come from the unit.

The unit has been dropped or the cabinet has been damaged.

The unit does not operate normally when you have followed the operating instructions. Adjust only those controls that are covered by the operating instructions in the Quick Start Guide and this User’s Manual. Improper adjustment of other controls may result in damage and may require extensive work by a qualified technician to restore the product to normal operation.

1-4 Introduction Chapter 1