Canon L6000 manual #005 Receiving fax Machine does not Answer

Message Error Code Cause Action

MEMORY USED nn%	—	Shows the percentage of
		memory currently in use.
NO ANSWER	#005	The receiving fax
		machine does not
		answer.
NO RX PAPER	#012	The other party’s fax is
		out of paper or its
		memory is full.
NO TEL #	#022	The one-touch or coded
		speed dialing number
		has not been registered.
NOT AVAILABLE	—	In manual sending, you
		entered a speed dialing
		number that is assigned
		to a group.
PLEASE WAIT	—	The MultiPASS is
		warming up.
REC’D IN MEMORY	—	The paper or toner ran
		out, or a paper jam
		occurred, so the
		MultiPASS received the
		document in memory.
RECEIVED IN FILE	—	The computer was
		off and a document
		was received in the
		memory of the
		MultiPASS.
START AGAIN	—	An error has occurred
		in the phone line or in
		the system.
TX/RX CANCELLED	—	You pressed STOP to
		cancel the transmission.
TX/RX NO. nnnn	—	When the MultiPASS
		sends or receives a fax,
		it assigns it a unique
		identification number.

If you need more space, print or send any documents in memory.

Make sure you dialed the correct number. Try again later.

Contact the other party and have them install paper in their fax.

Register the number (see page 3-18).

Use regular dialing.

Wait until the date and Receive Mode appear in the LCD display, then begin.

Add paper to the multi- purpose tray, change the toner cartridge, or clear the paper jam. The MultiPASS automatically prints the document stored in memory.

Turn the computer on to upload the file to the Desktop Manager.

To print the document, press FUNCTION then scroll to FILE PRINT and press START/COPY.

Start the procedure again from the beginning.

Try sending again.

Write the number down if you’ll need it later.

10-14Troubleshooting Chapter 10