Canon L6000 manual Entering Information in the MultiPASS, Entering Your User Information

Entering Information in the MultiPASS

When using the MultiPASS as a stand-alone fax machine, you must enter your user information into the unit through the operator panel.

When entering information through the operator panel of the MultiPASS, follow these guidelines.

❍If you pause and do not make an entry for more than 60 seconds, the MultiPASS returns to Standby mode. You must start the procedure over from the beginning.

❍If you make a mistake while entering registration information, you can correct it in one of two ways:

•

•

Press < or > to move the cursor under the wrong character, and then enter the correct character.

Press STOP and reenter the information.

Entering Your User Information

Follow the steps below to set the date and time for your MultiPASS and to enter your fax number and your name. The date and time appear in the LCD display as well as on the documents you send. Your fax number and name appear on each document you send.

B-2Using the MultiPASS L6000 as a Stand-alone Fax Appendix B