Canon L6000 manual Use automatic dialing

2

Use automatic dialing.

❍Press the one-touch speed dialing button (1 through 6) assigned to the number you wish to fax to; the name you assigned to that button is displayed.

CANON FAX BACK

OR

❍Press CODED DIAL and enter the appropriate two-digit coded speed dialing code.

CODED DIA

CCSI/MKT

❍If a number is not registered for the button or codes, the LCD displays NO TEL # message. Make sure you pressed the correct button or entered the correct code and that the number you want to dial is entered correctly.

❍If you make a mistake, press STOP. Then press the correct one-touch speed dialing button or press CODED DIAL and re-enter the code.

Faxes

3

Press

START/COPY.

START/COPY

DIALING

❍If you do not press START/COPY within five seconds, the MultiPASS starts sending your document automatically.

❍If the ALARM light is flashing for any reason, correct the error and press STOP. You may need to open the operator panel to remove the document from the ADF (see page 10-3).

Sending

Chapter 4 Sending Faxes With the MultiPASS L6000 4-5