Canon L6000 manual Redialing, Manual

❍If there is no group registered under the one-touch speed dialing button or the two-digit code, the LCD displays the NO TEL # message. Make sure you entered the correct number and that the group has been registered correctly to a speed dial code. See page 3-20.

❍If you make a mistake when dialing, press STOP. You can try again.

Redialing

Manual

To start dialing again, just press the REDIAL/PAUSE button. The MultiPASS redials the previous number you dialed with the numeric buttons. Make sure the document is in the ADF.

Automatic

The MultiPASS automatically redials if the first attempt at sending fails (for example, if the line is busy). The unit redials twice, and the time between redials is two minutes. (These are the default settings.) The LCD displays AUTO REDIAL and the transaction number while the MultiPASS is redialing.

AUTO REDIAL

TX/RX NO. XXXX

If the MultiPASS fails to make a connection after the last redial, it beeps. The LCD displays BUSY/NO SIGNAL; try sending again later.

BUSY/NO SIGNAL

You can change the number of redials and the time between redials. The redialing options are set in the Send Fax dialog box of the MultiPASS Desktop Manager; see page 8-4.

Sending Faxes

Chapter 4 Sending Faxes With the MultiPASS L6000 4-7