Canon L6000 manual You tried to send a fax Wait until the fax is

Message	Error Code	Cause	Action
COMMUNICATING	—	You tried to send a fax	Wait until the fax is
PLEASE WAIT		manually when the	sent, or use memory
		MultiPASS was already	sending.
		sending a fax from
		memory.

DOC TOO LONG	#003	It took more than 32
		minutes to send or
		copy a document.

It took more than 32 minutes to receive a document.

Divide the document and send or copy each part separately.

Contact the other party. Have them divide the document and send each part separately.

The document is longer	Use a copy machine to
than 39.4 inches (1 m).	make a reduced copy of
	the document and send
	the copy.

DOCUMENT READY

ECM RX

ECM TX

—The document in the ADF is ready for faxing, scanning, or copying.

—The MultiPASS is

—receiving (RX) or sending (TX) a fax using ECM.

Send the fax, scan the document, or make a copy.

ECM transmissions may take longer than normal transmissions. Turn off ECM if you need to receive or send quickly, or if you know your local lines are in good condition.

HANG UP PHONE

LOAD PAPER

MEMORY FULL

MEMORY FULL PLEASE WAIT

—The telephone is off hook.

—The MultiPASS is out of recording paper (the multi-purpose tray is empty).

#037	The memory of the
	MultiPASS is full
	because it has received
	too many documents,
	or a very long or
	detailed document.

Memory is full because you tried to send too many pages at once, or a very long or detailed document.

—The MultiPASS is sending a fax and its memory is full.

Place the telephone properly into its cradle.

Load paper in the multi- purpose tray. Any documents received in memory will be printed automatically.

Print out any documents that are stored in memory. Then start the operation again.

Divide the document and send each part separately.

The MultiPASS continues to send the fax as memory becomes available.

Troubleshooting

Chapter 10 Troubleshooting 10-13