Canon L6000 manual Ink/Toner Saver, Fax/Telephone Switching Options, Listen Time Before Ringing

❍Speed

You set the transmission speed used to receive faxes. The higher the setting, the faster the fax is received. If you experience problems when receiving faxes, try a lower speed setting.

❍Error Correction (ECM)

You select this option to reduce system and line errors when receiving a fax. With this option selected, the system checks each incoming fax for lost data. If data has been lost from a portion of a page, the system receives that portion again after confirming that all data within that portion can be received successfully.

❍Ink/Toner Saver

You select this option to print documents in the Desktop Manager using a reduced amount of toner. When using Ink/Toner Saver mode, the print document may appear less bright or contrasted.

❍Fax/Telephone Switching Options

You specify these options when your Receive Mode is Fax/Telephone Switching (FaxTel mode).

•Listen Time Before Ringing

When a call is received, the MultiPASS checks to see if the call is from a fax machine or a telephone. You use this option to set the appropriate amount of time (0-30 seconds) to allow the MultiPASS to check for the type of call. If your MultiPASS does not have enough time to detect the fax tone, it assumes the call is from a telephone.

•Ring Time

When your MultiPASS is set to receive both fax and telephone calls (FaxTel mode), it rings to inform you of an incoming telephone call. You use this option to set the appropriate amount of time (10-45 seconds) the MultiPASS will ring. If you do not pick up the telephone within a certain amount of time, the MultiPASS stops ringing.

•Ring Tone

You set the tone of the ring.

Setup and Utilities Desktop Manager

Chapter 8 Setup and Other Utilities in the Desktop Manager 8-9