Canon L6000 manual Automatic Dialing

❍When the document has been sent successfully, the display shows this message.

TRANSMITTING OK

The MultiPASS automatically redials if the receiving fax does not answer, if the line is busy, or if a transmission error occurs. You can specify the number of times it redials using the Automatic Retries option in the Send Fax dialog box of the MultiPASS Desktop Manager (see page 8-4). If all redial attempts fail, the MultiPASS beeps intermittently for a few seconds. If this happens, check the fax number and try sending the fax again.

If the ALARM light is flashing, correct the error described in the LCD display, and then press STOP. You may need to open the operator panel to remove the document from the ADF (see page 10-3).

Automatic Dialing

You can send a document using one-touch speed dialing, coded speed dialing, or group dialing. You must register the one-touch speed dialing numbers, the coded speed-dialing numbers, and the group dialing numbers using the MultiPASS Desktop Manager before you can send documents using these automatic dialing methods. See Setting Up Your Speed Dial Assignments on page 3-18.

1

Load the ❍ Place the document facedown in the ADF. document.

DOCUMENT READY

4-4 Sending Faxes With the MultiPASS L6000 Chapter 4