Dell 9.7(0.0) manual Show ip management-route, Fields Description Method, Example Brief

	Fields	Description
	Method	Displays “Manual” if the configuration is read from the saved
		configuration.
	Status	States whether the interface is enabled (up) or disabled
		(administratively down).
	Protocol	States whether IP is enabled (up) or disabled (down) on the
		interface.
Example (Brief)	Dell#show ip interface brief				OK? Method
	Interface			IP-Address
	Status		Protocol		NO	Manual
	TenGigabitEthernet		1/0	unassigned
	administratively down down				NO	Manual
	TenGigabitEthernet		1/1	unassigned
	administratively down down				YES Manual
	TenGigabitEthernet		1/2	unassigned
	up		up	unassigned	YES Manual
	TenGigabitEthernet		1/3
	up		up	unassigned	YES Manual
	TenGigabitEthernet		1/4
	up		up	10.10.10.1	YES Manual
	TenGigabitEthernet		1/5
	up		up	unassigned	NO	Manual
	TenGigabitEthernet		1/6

administratively down down

show ip management-route

View the IP addresses assigned to the Management interface.

S6000

Syntax

Parameters

Command Modes

show ip management-route [all connected summary static]

all	(OPTIONAL) Enter the keyword all to view all IP addresses
	assigned to all Management interfaces on the switch.
connected	(OPTIONAL) Enter the keyword connected to view only
	routes directly connected to the Management interface.
summary	(OPTIONAL) Enter the keyword summary to view a table
	listing the number of active and non-active routes and their
	sources.
static	(OPTIONAL) Enter the keyword static to view non-active
	routes also.

•EXEC

•EXEC Privilege

IPv4 Routing 801